Sr. Thermal Engineer - Fluids Analysis, AI Satellites (Starmind)
- Level
- Senior
Not stated in the posting: salary, work type, visa.
Open. First seen 23 July 2026.
About the role
SpaceX's standard text
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
SR. THERMAL ENGINEER (FLUIDS ANALYSIS), AI SATELLITES (STARMIND)
SpaceX is leveraging its experience deploying and operating the world’s largest satellite constellation to develop Starmind, a new constellation of satellites capturing solar energy in space to power low-cost, high-performance AI compute for Earth. Scaling AI in space is a thermal problem as much as a power and processing problem. With a dense compute payload dissipating hundreds of kilowatts, the thermal system must efficiently transfer heat to large radiators that reject it to space, under solar load, eclipse, and multi-mode AI duty cycles.
You will join the StarmindThermal team, which owns the satellite cooling stack end-to-end. Rejecting hundreds of kilowatts of accelerator waste heat to space is limited by high-flux loads transferring heat to massive deployable radiators. No capable cooling architecture has been flown at this scale.
As a Senior Thermal Engineer focused on fluids analysis, you own conjugate heat transfer and thermal-fluid analysis of cold plates, heat exchangers, and radiator channels and manifolds, and the system 0-D/1-D thermal-fluid network that sets flow split, ΔP budget, loop ΔT, and pump operating point. You co-evolve geometry and flow path with mechanical and fluid-systems owners under tight feedback from manufacturing and test. You sit where the local physics is hardest and the design decisions stick: predictions that close margins, ground in test, and drive rate-production hardware.
RESPONSIBILITIES:
- Own conjugate heat-transfer (CHT) and thermal-fluid analysis of high-performance cold plates, heat exchangers, and radiator channels for STARMIND satellites
- Own the system 0-D/1-D thermal-fluid network that sizes and balances the cooling loop: flow split, ΔP budget, loop ΔT, pump operating point
- Drive cooling-loop architecture trades with hardware and vehicle-level thermal teammates
- Co-evolve geometry, materials and processes with hardware owners to find mass producible, efficient thermal solutions
- Predict component and system performance under wide range of flow and thermal conditions
- Own pre-test prediction, test design, and model-test correlation for fluid component and integrated thermal tests
- Automate analysis workflows for re-running trades as designs and boundary conditions change
BASIC QUALIFICATIONS:
- Bachelor’s degree in mechanical, aerospace, or a related engineering discipline
- 5+ years of professional experience in fluids, CFD, or thermal analysis
PREFERRED SKILLS AND EXPERIENCE:
- Master’s degree in mechanical, aerospace, or a related engineering discipline
- Steady/transient conjugate heat-transfer CFD of liquid-cooled or high-heat-flux hardware (STAR-CCM+, ANSYS Fluent/CFX, or equivalent)
- Hand-calc checks and engineering judgment on mesh, turbulence modeling, and model fidelity
- Hands on hardware testing inclusive of instrumentation selection and model correlation
- Relevant manufacturing techniques, and judiciously pushing their constraints
- Watertight CFD geometry (Siemens NX or equivalent)
- Package/board-level tools as secondary (Icepak, Flotherm)
- 0-D/1-D thermal-fluid network modeling to size and balance cooling loops (flow split, ΔP budget, loop ΔT, pump operating point)
- Scripting analysis workflows and post-processing (Python preferred)
ADDITIONAL REQUIREMENTS:
- Ability to work extended hours or weekends as needed for mission critical deadlines
- Some travel may occasionally be required
ITAR REQUIREMENTS:
- To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.
SpaceX's standard text
SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected].
What this role asks for
Particular to this role
ANSYS · Siemens NX
Rare in SpaceX's other 299 open postings.
Standard for software engineering roles
Python
Common in software engineering postings at any company.
80% of this description is written for the role. The rest is SpaceX's standard text, folded away below.
Compared with SpaceX's other open jobs.
The team: Mesh Optical HIRES STEADILY
This role is one of 23 open in Mesh Optical. 1 was posted in the last 30 days and the oldest in July: a team that hires all year rather than one being built.
WHAT THE TEAM WORKS WITH, ACROSS ITS POSTINGS
Python (13 of 23), C++ (8 of 23), MATLAB (8 of 23), C (6 of 23), Embedded Systems (5 of 23), GD&T (5 of 23), FEA (4 of 23)
OTHER ROLES ON THIS TEAM
- Lead Manufacturing Engineer, Mesh Optical (Starmind) posted Oct 29
- Electrical Test Engineer, AI Satellites (Starmind) posted Oct 8
- Embedded Software Engineer, Data Center Engineering (Starmind) posted Oct 6
- Principal Electrical Engineer, AI Satellites (Starmind) posted Sep 17
- GNC Engineer - Embedded Controls (Starlink) posted Sep 4
- Thermal Engineer, AI Satellites (Starmind) posted Aug 18
- Tooling Engineer, AI Satellites (Starmind) posted Aug 18
- Automation and Controls Engineer, AI Satellites (Starmind) posted Aug 18
- Integration & Test Engineer, AI Satellites (Starmind) posted Aug 18
- New Graduate Engineer, Software - '26/'27 (Starlink) posted Aug 14
- New Graduate Engineer, Electrical - '26/'27 (Starlink) posted Aug 14
- Manufacturing Engineer, AI Satellites (Starmind) posted Aug 11
- Principal Engineer, AI Satellites (Starmind) posted Aug 7
- GNC Engineer - Embedded Controls, AI Satellites (Starmind) posted Aug 4
- Software Engineer, AI Satellites (Starmind) posted Aug 4
- Sr. Thermal Engineer - Spacecraft Analysis, AI Satellites (Starmind) posted Jul 23
- Sr. Process Engineer - Wafer Level Assembly, AI Satellites (Starmind) posted Jul 22
- Sr. Packaging Engineer - Thermal Materials, AI Satellites (Starmind) posted Jul 22
- Sr. Materials Engineer, AI Satellites (Starmind) posted Jul 22
- Materials Engineer, AI Satellites (Starmind) posted Jul 22
- Sr. Mechanical Engineer, AI Satellites (Starmind) posted Jul 21
- Mechanical Engineer, AI Satellites (Starmind) posted Jul 21
From the team and dates on SpaceX's own job board.
Similar jobs
- CAD Engineer - AI Trainer at Mindrift
Shares 3 skills: Siemens NX, ANSYS, Python · same country - Sr CAD Administrator, Engineering Applications at Relativity Space
Shares 3 skills: Siemens NX, ANSYS, Python · Senior level · same country - Structural Dynamics Engineer at Overview Energy
Shares 3 skills: Siemens NX, ANSYS, Python · Senior level · same country - Quality Engineering Intern Spring 2027 at Rocket Lab Corporation
Shares 3 skills: Siemens NX, ANSYS, Python · same country - Technical Trainer, Starlink Satellite Production at SpaceX
Also at this company
More jobs like this
Is this your posting? Email [email protected] to have it removed.