Embedded & Firmware Engineer (human)
- Level
- Mid
- Work type
- On-site · Metzingen
Not stated in the posting: salary, visa.
Open. First seen 2 October 2026.
About the role
Your mission & challenges
You write the firmware that makes cognitive robots tick — at 1 kHz and beyond.
NEURA's robots run dense, safety-relevant, real-time workloads across a distributed network of microcontrollers and SoCs. Your firmware keeps the system deterministic, observable, and ready for the AI stack above it. You'll work across the embedded stack — from bare-metal drivers and BSP (Board support package) bring-up to RTOS application layers, communication middleware, and OTA infrastructure — collaborating closely with electronics, systems, and AI/software engineers.
- BSP & driver development: Develop, port, and maintain board support packages and low-level peripheral drivers (GPIO, SPI, I²C, UART, CAN-FD, EtherCAT, USB) for ARM Cortex-M and Cortex-A targets; support hardware bring-up from first power-on.
- RTOS application layer: Architect and implement FreeRTOS (or equivalent) task structures, inter-task communication, priority management, and resource allocation for safety-critical real-time applications.
- Sensor & actuator integration: Integrate IMUs, encoders, tactile sensors, ToF sensors, force/torque sensors, and BLDC motor controllers into the firmware stack; implement filtering, calibration routines, and data timestamping.
- Communication middleware: Implement and maintain embedded communication stacks — CAN-FD network management, micro-ROS / DDS-XRCE bridge, EtherCAT slave stack — ensuring reliable, low-latency data exchange with the main robot controller.
- Safety & monitoring: Implement hardware watchdogs, software safety monitors, safe-state machines, and power-loss handling; contribute to functional safety analysis (FMEA, safety requirements allocation).
- OTA & configuration management: Design and maintain firmware update mechanisms (OTA, JTAG/SWD flashing), boot sequence management, non-volatile configuration storage, and firmware versioning aligned with the PLM system.
- Testing and CI: Write unit and integration tests for firmware modules; support HIL (hardware-in-the-loop) test setups; integrate automated firmware testing into CI/CD pipelines.
- Documentation and code quality: Maintain clear, peer-reviewed code with proper documentation; participate in firmware architecture reviews and contribute to shared coding standards across the embedded team.
What we can look forward to
Deep embedded expertise with a system-level mindset.
You are an embedded engineer who thinks in terms of determinism, latency, and resource constraints — and who is equally comfortable writing a CAN driver as reviewing a schematic with the hardware team. You understand that firmware quality is invisible when it's good and catastrophic when it's not.
- Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, Embedded Systems, or a related field.
- 3+ years of professional embedded firmware development experience in a real-time, resource-constrained environment (robotics, industrial automation, medtech, automotive, or similar).
- Expert-level C/C++ for microcontrollers; strong understanding of memory models, volatile/atomic operations, stack management, and linker scripts.
- Solid hands-on experience with ThreadX or a comparable RTOS — task creation, synchronization primitives, interrupt handling, and timing analysis.
- Experience with ARM Cortex-M series (M0/M3/M4/M7/M33) and ideally also Cortex-A targets running embedded Linux or Zephyr.
- Practical experience with key peripheral interfaces: EtherCAT, SPI, I²C, UART, USB CDC/HID, CAN-FD, or similar; ability to debug protocol issues with logic analyzers and oscilloscopes.
- Familiarity with micro-ROS or ROS 2 integration (fastDDS) is a significant advantage.
- Experience with firmware CI/CD, unit testing frameworks (Unity, Ceedling, GoogleTest for embedded), and version control (Git).
- Ability to read hardware schematics and collaborate effectively with electronics and mechanical engineers at the HW/SW boundary.
- Good English; German is a practical advantage for day-to-day collaboration.
What this role asks for
Particular to this role
CAN bus · Git · RTOS · Unity
Rare in Neura Robotics's other 147 open postings.
Standard for embedded / hardware roles
C++ · Embedded Systems
Common in embedded / hardware postings at any company.
Compared with Neura Robotics's other open jobs.
The team: Electrical Engineering HIRES STEADILY
This role is one of 5 open in Electrical Engineering. 1 was posted in the last 30 days and the oldest in May: a team that hires all year rather than one being built.
WHAT THE TEAM WORKS WITH, ACROSS ITS POSTINGS
Embedded Systems (5 of 5), CAN bus (3 of 5), Altium (2 of 5), C (2 of 5), C++ (2 of 5), PCB Design (2 of 5)
OTHER ROLES ON THIS TEAM
- Sensor Hardware Engineer – Tactile, Audio & Vision (human) posted Nov 18
- Prototype & Cabling Engineer (human) posted May 11
- PCB Design & Electrical Engineer (human) posted May 11
- Hardware Architect - Cognitive Robotics (human) posted May 11
From the team and dates on Neura Robotics's own job board.
Similar jobs
- R&D-031 Firmware / Embedded Software Engineer (Robotics) at AI Robot Association
Shares 6 skills: ROS, RTOS, C… · same seniority - Embedded Firmware Engineer at Vatn Systems
Shares 7 skills: ROS, RTOS, C… · same seniority - Senior Embedded Software Engineer – Real-Time Flight Software (m/f/d) at tytantechnologiesgmbh
Shares 6 skills: CAN bus, RTOS, C… · same country - Senior Embedded Software Systems Engineer - Robotics at Rapyuta Robotics
Shares 7 skills: ROS, RTOS, C… - Senior Embedded Firmware Engineer at Brelle
Shares 7 skills: CAN bus, RTOS, C… - Sensor Hardware Engineer – Tactile, Audio & Vision (human) at Neura Robotics
Also at this company
More jobs like this
Is this your posting? Email [email protected] to have it removed.