Neura Robotics

Embedded Firmware Engineer - Humanoid (human)

Zurich
Level
Mid

Not stated in the posting: salary, work type, visa.

Open. First seen 17 November 2026.

About the role

Your mission & challenges

Our system runs high-density sensing and actuation at 1 kHz. Your firmware will keep the system stable, safe, and responsive. You will own the embedded software on the central ARM controller and the distributed motor controllers, implementing high-rate FOC, safety limits, and communication with the ROS 2 stack. You will work closely with electronics, mechatronics, and controls engineers to turn the architecture into a robust, testable embedded system.

  • Implement and tune FOC / current, velocity, and position loops on ARM Cortex-M33 class motor controllers at ≥1 kHz.
  • Develop FreeRTOS-based firmware on a high-performance ARM Cortex-M7 central controller:
  • Motor network supervision (CAN-FD/SPI/RS485).
  • Sensor fusion for encoders, force sensing, ToF, IMUs, and tactile arrays.
  • Safety monitoring, watchdogs, and power-loss handling.
  • Integrate with micro-ROS / DDS-XRCE to expose the system as a single logical node to the main robot controller.
  • Implement calibration procedures, configuration management, and firmware update mechanisms.
  • Design and run unit/integration tests for control and safety logic; support HIL / bench testing.
  • Work tightly with controls/AI engineers on interfaces, timing budgets, and observability.

What we can look forward to

  • 4+ years in embedded firmware for real-time systems (robotics, motion control, automotive, industrial).
  • Fluency in C / C++ for microcontrollers and RTOS environments (FreeRTOS or similar).
  • Practical experience with BLDC motor control, FOC, and real-time control loops.
  • Experience with one or more of: CAN-FD, SPI, RS485, Ethernet in real-time systems.
  • Comfortable reading schematics, understanding power and sensing hardware, and debugging at the HW/SW boundary.
  • Strong focus on safety, reliability, and deterministic behaviour.
  • Experience with ARM Cortex-M7/M85 platforms and dual-core debugging.

micro-ROS / ROS 2 integration experience.

  • Prior work on servo drives or complex articulated robotic systems.
  • Familiarity with control theory (impedance control, observers, state estimation).

What this role asks for

Particular to this role

CAN bus · RTOS

Rare in Neura Robotics's other 147 open postings.

Standard for embedded / hardware roles

C++ · Embedded Systems

Common in embedded / hardware postings at any company.

Compared with Neura Robotics's other open jobs.

The team: Mechanical Engineering HIRES STEADILY

This role is one of 9 open in Mechanical Engineering. 6 were posted in the last 30 days and the oldest in July: a team that hires all year rather than one being built.

WHAT THE TEAM WORKS WITH, ACROSS ITS POSTINGS

SolidWorks (5 of 9), Creo (4 of 9), C++ (3 of 9), GD&T (3 of 9), ROS (3 of 9), Docker (2 of 9), Python (2 of 9)

OTHER ROLES ON THIS TEAM

From the team and dates on Neura Robotics's own job board.

Similar jobs

More jobs like this

Is this your posting? Email [email protected] to have it removed.