Staff Propulsion Engineer, Combustion Devices, Liquids
- Salary
- $155,000 - $193,000
- Level
- Staff
Not stated in the posting: work type, visa.
Open. First seen 18 November 2026.
About the role
Ursa Major's standard text
The future of aerospace and defense starts here.
Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.
Our products and technologies require an extraordinary team. A team that will mold the technologies of tomorrow while delivering today’s best. We are an intrinsically motivated team that has a passion for solving problems and empowering each other every day to develop our skills knowing that there is always room for growth.
As a Staff Propulsion Engineer for Combustion Devices you are an advanced technical leader and a primary owner for combustion hardware across one or more engine programs. You will lead clean sheet design development and validation of combustion devices such as injectors chambers nozzles preburners and ignition systems. You will drive architecture and trade studies for combustion devices solve the most challenging technical problems refine standards and best practices and mentor other engineers.
You will own hardware and technical roadmaps from concept through qualification and production support and will often support multiple engines or product lines at once.
Responsibilities
- Lead clean sheet design and development of combustion devices including main injectors, preburner injectors, combustion chambers, nozzles, and ignition systems and integrate these into the engine system
- Own combustion device hardware through the full lifecycle including concept design, detailed design, build, test, qualification, production support, and fielded hardware issue resolution
- Lead performance modeling and analysis for combustion devices including injector and chamber sizing combustor performance models and stability evaluation and maintain and improve these models over time
- Define and conduct trade studies for engine and combustion architecture options and provide clear recommendations on configuration performance cost risk and manufacturability
- Develop and improve standards work instructions design guides and acceptance and qualification test approaches for combustion devices and ensure consistent application across programs
- Lead root cause investigations for combustion device issues in test or production and drive implementation of durable corrective actions in design process and test
- Plan and oversee development and qualification test campaigns for combustion devices and work closely with test and analysis teams to interpret data and update designs and models
- Collaborate closely with systems analysis materials manufacturing and test teams to reduce variation improve reliability and enable efficient production of combustion hardware
- Mentor and train junior and senior engineers in combustion device design analysis test and development practices and lead design reviews and technical deep dives
- Collaborate closely with manufacturing and printing to establish guideline, standards, and requirements for manufacturing quality, repeatability, and qualification
Required Qualifications
- Bachelor degree in Mechanical Aerospace or related Engineering field Master preferred
- 8 plus years of experience in propulsion or mechanical design roles with significant time focused on liquid rocket engine combustion devices
- Direct experience owning design test or analysis of rocket engine injectors chambers or nozzles through build and hot fire testing
- Demonstrated proficiency with computer aided design and drafting and experience applying geometric dimensioning and tolerancing per ASME Y14.5
- Strong understanding of closed cycle or staged combustion engine operating principles and liquid rocket engine system integration
- Working knowledge and hands on experience with fluid mechanical and basic electrical systems as applied to propulsion hardware
- Demonstrated ability to independently lead complex hardware or subsystem scope across multiple builds or programs and deliver production ready designs
- Strong understanding of industry standards and requirements and experience working within aerospace or defense quality environments
- Excellent problem solving task management communication and cross functional collaboration skills
Preferred Experience
- Experience leading technical teams or workstreams for combustion devices on development or production engine programs
- Experience with combustion stability analysis injector characterization and combustion device development testing
- Demonstrated proficiency with basic machining practices or close collaboration with machine shops and experience with design for additive manufacturing for hot gas components
- Experience with structural thermal or fluids analysis using tools such as Ansys and or CFD tools for combustor and injector analysis
- Experience with PTC Creo or Siemens NX and PLM systems such as Windchill
- Direct experience with qualification and acceptance of combustion hardware and support of flight or fielded propulsion systems
Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $193,000, determined by your education, experience, knowledge, skills, and abilities. What we can’t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy.
Classification: Full-time Exempt
Benefits Include: (Please note, Interns are not eligible for benefits)
Ursa Major's standard text
- Unlimited PTO - Vacation, Sick, Personal, and Bereavement
- Paid Parental and Adoptive Leave
- Medical, Dental and Vision Insurance
- Tax Advantage Accounts (HSA/FSA)
- Employer Paid Short and Long Term Disability, Basic Life, AD&D
- Additional Benefit Options Including Voluntary Life and Emergency Medical Transport
- EAP Program
- Retirement Savings Plan - 401k with Company Match
How To Apply:
Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.
NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.
Must be a U.S. Person (this includes U.S. Citizens and Permanent Residents).
Eligibility to obtain and maintain a U.S. Security Clearance.
Ursa Major's standard text
We’re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
No outside recruiters, please.
What this role asks for
Particular to this role
Creo
Rare in Ursa Major's other 74 open postings.
77% of this description is written for the role. The rest is Ursa Major's standard text, folded away below.
Compared with Ursa Major's other open jobs.
The team: Engineering HIRES STEADILY
This role is one of 48 open in Engineering. 11 were posted in the last 30 days and the oldest in January: a team that hires all year rather than one being built.
WHAT THE TEAM WORKS WITH, ACROSS ITS POSTINGS
ANSYS (24 of 48), Siemens NX (23 of 48), FEA (18 of 48), GD&T (14 of 48), Creo (10 of 48), Python (5 of 48), MATLAB (3 of 48)
OTHER ROLES ON THIS TEAM
- Engineer, Liquid Propulsion posted Nov 18
- Staff Propulsion Engineer, Fluid & Mechanical Systems, Liquids posted Nov 18
- Staff Controls Engineer posted Nov 17
- Senior Systems Engineer - Avionics posted Nov 17
- Senior Conceptual Design Engineer, Solid Rocket Motors posted Nov 12
- Senior Program Manufacturing Engineer, SRM posted Nov 12
- Staff Program Manufacturing Engineer, SRM posted Nov 12
- Senior Development Engineer, SRM posted Nov 6
- Senior Design Engineer, Solid Rocket Motor Nozzles posted Nov 2
- Senior Design Engineer, TVC posted Nov 2
- Manufacturing Engineer II, SRM posted Oct 16
- Senior Mission Integration Engineer, Cryo posted Oct 14
- Staff Systems Engineer – Safety & Reliability - Solid Rocket Motors posted Oct 14
- Ballistics Analyst, II posted Oct 7
- Loads and Dynamics Analyst, II posted Oct 7
- Senior Structural Analyst, Solid Rocket Motors posted Oct 7
- Senior Design Engineer, Solid Rocket Motor Ignition Systems posted Oct 7
- Avionics Test Manager posted Sep 29
- Senior Systems Engineer, In-Space posted Sep 29
- Senior Propulsion Engineer, Tanks, Draper posted Sep 29
- Electromechanical Engineer II posted Sep 15
- Staff Design Engineer, Solid Rocket Motor Cases posted Sep 14
- Turbomachinery Engineer II posted Sep 9
- Staff Design Engineer, Solid Rocket Motor Nozzles posted Sep 3
- Senior Design Engineer, Solid Rocket Motor Cases posted Aug 26
- Design Engineer II, Solid Rocket Motors posted Aug 26
- Senior Maintenance Engineer posted Aug 26
- Senior Systems Engineer posted Aug 18
- Systems Engineer II - MBSE posted Aug 18
- Senior Mission Engineer posted Aug 18
- Senior Manufacturing Engineer posted Aug 13
- Propulsion Engineer, Combustion Devices, Liquids posted Aug 11
- Propulsion Engineer, Fluid & Mechanical Systems, Draper posted Aug 11
- Senior Propulsion Engineer, Combustion Devices, Liquids posted Aug 11
- Senior Propulsion Engineer, Fluid & Mechanical Systems, Draper posted Aug 11
- Chief Engineer, Hypersonic Missile and Interceptor, Vehicle posted Aug 6
- Senior Turbomachinery Engineer posted Jul 16
- Staff Turbomachinery Engineer posted Jul 16
- Senior Manufacturing Engineer - AP Milling, SRM posted Jul 16
- Propulsion Engineer (Vehicle) posted Jul 14
- Development Engineer II, SRM posted Jun 26
- Program Chief Engineer, SRM posted Jun 26
- Propulsion Engineer II (Vehicle) posted Jun 19
- Senior Materials Engineer, SRM posted Jun 5
- Propellant Tank Responsible Engineer, In-Space posted May 29
- Senior Systems Engineer - Havoc posted Feb 2
- Principal Engineer, Propulsion Systems, Vehicle posted Jan 29
From the team and dates on Ursa Major's own job board.
Similar jobs
- Principal Mechanical Engineer at Saronic Technologies
Shares 4 skills: Creo, Siemens NX, ANSYS… · Staff level · same country - Mechanical Engineer, AI Expert (Full-Time, US) at Weekday AI
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - Senior Mechanical Engineer at Shift Robotics
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - Sr. Mechanism Engineer at Portal Space Systems
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - MRB Mechanical Engineering Manager, Fury at Anduril Industries
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - Engineer, Liquid Propulsion at Ursa Major
Also at this company
More jobs like this
Is this your posting? Email [email protected] to have it removed.