Staff Propulsion Engineer, Fluid & Mechanical Systems, Liquids
- Salary
- $155,000 - $193,000
- Level
- Staff
Not stated in the posting: work type, visa.
Open. First seen 18 November 2026.
About the role
Ursa Major's standard text
The future of aerospace and defense starts here.
Ursa Major was founded to revolutionize how America and its allies access and apply high-performance propulsion, from hypersonics to solid rocket motors, satellite maneuvering and launch. We design and deliver propulsion and defense systems that solve the most urgent and critical national security demands.
Our products and technologies require an extraordinary team. A team that will mold the technologies of tomorrow while delivering today’s best. We are an intrinsically motivated team that has a passion for solving problems and empowering each other every day to develop our skills knowing that there is always room for growth.
Ursa Major teams move fast and do a lot with little. As a Staff Propulsion Engineer for Fluid and Mechanical Systems you are an advanced technical leader and primary owner for fluid and mechanical hardware and systems across one or more engine programs of various maturities. You will lead clean sheet design development and validation of components and systems such as valves actuators gimbals feed systems and test stand fluid systems.
You will drive system architecture and trades solve the most challenging technical problems refine standards and best practices and mentor other engineers. You will own hardware and system roadmaps from concept through qualification and production support and often support multiple engines or product lines at once. Oversee maintenance and continued operation of flight proven hardware.
Responsibilities
- Lead clean sheet design and development of fluid and mechanical engine components including control valves, actuators, gimbals, and feed systems and integrate these into the engine and test stand architectures.
- Own fluid and mechanical hardware and subsystems through the full lifecycle, including concept design, detailed design, build, test, qualification, production support, and fielded hardware issue resolution.
- Develop and maintain system level fluid architectures including P&IDs, operating concepts, and control strategies for engine and test stand systems and perform trade studies on configuration performance cost risk and operability
- Lead performance and sizing analysis for high pressure cryogenic and hot fluid systems including valve sizing, line sizing, pressure drop, cavitation margin, and dynamic response
- Develop and improve standards, work instructions, design guides, and acceptance and qualification test approaches for fluid and mechanical components and systems and ensure consistent use across programs
- Lead root cause investigations for fluid or mechanical system issues in test or production and drive durable corrective actions in design process and operations
- Plan and oversee development qualification and acceptance test campaigns for fluid and mechanical hardware and work closely with test and analysis teams to interpret data and update designs and models
- Collaborate with combustion devices systems analysis materials manufacturing avionics and test operations teams to reduce variation improve reliability and enable efficient production and operation of fluid and mechanical systems
- Mentor and train junior and senior engineers in fluid system and mechanical design analysis test and development practices and lead design reviews and technical deep dives
- Work with purchasing and material control to identify and address supply chain challenges, obsolescence, and vendor quality
Required Qualifications
- Bachelor degree in Mechanical Aerospace or related Engineering field Master preferred
- 8 plus years of experience in propulsion or mechanical design roles with significant time focused on fluid and mechanical systems for aerospace or similar high consequence applications
- Direct experience owning design test or analysis of high pressure fluid systems and components such as valves actuators regulators manifolds or gimbals through build and test
- Strong understanding of fluid mechanics and intuition for high pressure cryogenic and propellant systems and experience with system level fluid architecture and integration
- Demonstrated proficiency with computer aided design and drafting and experience applying geometric dimensioning and tolerancing per ASME Y14.5
- Working knowledge and hands on experience with fluid mechanical and basic electrical systems as applied to propulsion hardware and control
- Experience operating within ISO 9001 or AS9100 environments and working knowledge of aerospace hardware qualification requirements and standards such as SMC S 016
- Demonstrated ability to independently lead complex hardware or subsystem scope across multiple builds or programs and deliver production ready designs
- Excellent problem solving task management communication and cross functional collaboration skills
Preferred Experience
- Experience leading technical teams or workstreams for fluid and mechanical systems on development or production engine or test stand programs
- Hands on test experience with high pressure cryogenic or propellant fluid systems including component and system level testing
- Familiarity with closed cycle or staged combustion engine architectures and their fluid system implications
- Demonstrated proficiency with basic machining practices or close collaboration with machine shops and experience with design for additive manufacturing for valve and actuator hardware
- Experience with structural thermal or fluids analysis using tools such as Ansys and or CFD tools for valve and fluid system analysis
- Experience with PTC Creo or Siemens NX and PLM systems such as Windchill
- Experience designing components and systems for cryogenic service in oxygen hydrogen or methane and supporting flight qualification or flight hardware operations
Colorado law requires us to tell you the base compensation range of this role, which is $155,000 - $193,000, determined by your education, experience, knowledge, skills, and abilities. What we can’t quantify for you are the exciting challenges, supportive team, and amazing culture we enjoy.
Classification: Full-time Exempt
Benefits Include: (Please note, Interns are not eligible for benefits)
Ursa Major's standard text
- Unlimited PTO - Vacation, Sick, Personal, and Bereavement
- Paid Parental and Adoptive Leave
- Medical, Dental and Vision Insurance
- Tax Advantage Accounts (HSA/FSA)
- Employer Paid Short and Long Term Disability, Basic Life, AD&D
- Additional Benefit Options Including Voluntary Life and Emergency Medical Transport
- EAP Program
- Retirement Savings Plan - 401k with Company Match
How To Apply:
Interested candidates are encouraged to apply by filling out the application below and clicking "Submit Application". This position will be posted for a minimum of 3 days and will remain open until filled or adjusted based on the volume of applicants.
NOTE: Research suggests that women and BIPOC individuals may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage anyone who believes they have the skills and the drive necessary to succeed here to apply for this role.
Must be a U.S. Person (this includes U.S. Citizens and Permanent Residents).
Eligibility to obtain and maintain a U.S. Security Clearance.
Ursa Major's standard text
We’re an equal-opportunity employer. You will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.
No outside recruiters, please.
What this role asks for
Particular to this role
Creo
Rare in Ursa Major's other 74 open postings.
79% of this description is written for the role. The rest is Ursa Major's standard text, folded away below.
Compared with Ursa Major's other open jobs.
The team: Engineering HIRES STEADILY
This role is one of 48 open in Engineering. 11 were posted in the last 30 days and the oldest in January: a team that hires all year rather than one being built.
WHAT THE TEAM WORKS WITH, ACROSS ITS POSTINGS
ANSYS (24 of 48), Siemens NX (23 of 48), FEA (18 of 48), GD&T (14 of 48), Creo (10 of 48), Python (5 of 48), MATLAB (3 of 48)
OTHER ROLES ON THIS TEAM
- Engineer, Liquid Propulsion posted Nov 18
- Staff Propulsion Engineer, Combustion Devices, Liquids posted Nov 18
- Staff Controls Engineer posted Nov 17
- Senior Systems Engineer - Avionics posted Nov 17
- Senior Conceptual Design Engineer, Solid Rocket Motors posted Nov 12
- Senior Program Manufacturing Engineer, SRM posted Nov 12
- Staff Program Manufacturing Engineer, SRM posted Nov 12
- Senior Development Engineer, SRM posted Nov 6
- Senior Design Engineer, Solid Rocket Motor Nozzles posted Nov 2
- Senior Design Engineer, TVC posted Nov 2
- Manufacturing Engineer II, SRM posted Oct 16
- Senior Mission Integration Engineer, Cryo posted Oct 14
- Staff Systems Engineer – Safety & Reliability - Solid Rocket Motors posted Oct 14
- Ballistics Analyst, II posted Oct 7
- Loads and Dynamics Analyst, II posted Oct 7
- Senior Structural Analyst, Solid Rocket Motors posted Oct 7
- Senior Design Engineer, Solid Rocket Motor Ignition Systems posted Oct 7
- Avionics Test Manager posted Sep 29
- Senior Systems Engineer, In-Space posted Sep 29
- Senior Propulsion Engineer, Tanks, Draper posted Sep 29
- Electromechanical Engineer II posted Sep 15
- Staff Design Engineer, Solid Rocket Motor Cases posted Sep 14
- Turbomachinery Engineer II posted Sep 9
- Staff Design Engineer, Solid Rocket Motor Nozzles posted Sep 3
- Senior Design Engineer, Solid Rocket Motor Cases posted Aug 26
- Design Engineer II, Solid Rocket Motors posted Aug 26
- Senior Maintenance Engineer posted Aug 26
- Senior Systems Engineer posted Aug 18
- Systems Engineer II - MBSE posted Aug 18
- Senior Mission Engineer posted Aug 18
- Senior Manufacturing Engineer posted Aug 13
- Propulsion Engineer, Combustion Devices, Liquids posted Aug 11
- Propulsion Engineer, Fluid & Mechanical Systems, Draper posted Aug 11
- Senior Propulsion Engineer, Combustion Devices, Liquids posted Aug 11
- Senior Propulsion Engineer, Fluid & Mechanical Systems, Draper posted Aug 11
- Chief Engineer, Hypersonic Missile and Interceptor, Vehicle posted Aug 6
- Senior Turbomachinery Engineer posted Jul 16
- Staff Turbomachinery Engineer posted Jul 16
- Senior Manufacturing Engineer - AP Milling, SRM posted Jul 16
- Propulsion Engineer (Vehicle) posted Jul 14
- Development Engineer II, SRM posted Jun 26
- Program Chief Engineer, SRM posted Jun 26
- Propulsion Engineer II (Vehicle) posted Jun 19
- Senior Materials Engineer, SRM posted Jun 5
- Propellant Tank Responsible Engineer, In-Space posted May 29
- Senior Systems Engineer - Havoc posted Feb 2
- Principal Engineer, Propulsion Systems, Vehicle posted Jan 29
From the team and dates on Ursa Major's own job board.
Similar jobs
- Principal Mechanical Engineer at Saronic Technologies
Shares 4 skills: Creo, Siemens NX, ANSYS… · Staff level · same country - Mechanical Engineer, AI Expert (Full-Time, US) at Weekday AI
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - Senior Mechanical Engineer at Shift Robotics
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - MRB Mechanical Engineering Manager, Fury at Anduril Industries
Shares 4 skills: Creo, Siemens NX, ANSYS… · same country - Staff Mechanical Engineer at Radiant Industries
Shares 3 skills: Siemens NX, ANSYS, GD&T · Staff level · same country - Engineer, Liquid Propulsion at Ursa Major
Also at this company
More jobs like this
Is this your posting? Email [email protected] to have it removed.